5
CORDLESS DRILL
Do not operate power tools in potentially explosive surroundings, for example, in the presence of
inflammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can cause you to
lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with
earthed power tools. Unmodified plugs and matching outlets will reduce the risk of a lethal electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and refrigerators. There
is an increased risk of a lethal electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will increase the
risk of a lethal electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of a
lethal electric shock.
When operating a power tool outdoors, use an extension cable suitable for outdoor use. Using a cord
suitable for outdoor use reduces the risk of a lethal electric shock.
If operating a power tool in a damp location is unavoidable, use a power supply protected by a residual
current device (RCD). Using an RCD reduces the risk of a lethal electric shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention when operating a power tool may result in serious personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid
safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal
injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power
tools with your finger on the switch or plugging in power tools when the switch is in the on position makes
accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached
to a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable you retain
control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from the
power tool. Loose clothes, jewelry or long hair can become entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure that they are
attached and used correctly. Using such devices can reduce dust-related hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do.
A power tool will achieve better results and be safer if used in the context for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken switch is
dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Содержание VMGA003
Страница 11: ...11 CORDLESS DRILL...
