Heinner HXSF-16WH, Инструкция по эксплуатации

Страница: 5 / 33

www.heinner.com 55W, 50Hz, 220V
4
VI. HOW TO ASSEMBLE THE FAN
WARNING: Please unplug the fan before installing to the wall and the grid, and please install the
fan impeller and grid completely (detail as graph) before using.
1.
Attach the stand pipe to the fan base with the attached screws.
2. Pull out the extension pipe to required height and fasten the pipe locking nut tightly.
3. Mount the fan head assembly to the fan-stand assembly and fasten the thumb screw.
4. Remove the blade locking nut and the rear guard locking nut from the motor shaft, attach
the rear guard to the head by tightening the locking nut firmly.
5. Attach the fan blade to motor shaft and tighten the blade locking nut firmly.
6. Mount the front guard to rear guard with plastic hoop and tighten the screw on the firmly.
VI. HOW TO OPERATE
SPEED / ON BUTTON
Press this button to start fan and choose the wind speed: high, medium or low speed. The
relevant indicator light will light up.
TIMER BUTTON
Press this button to preset the running time from 0.5 to 10 hours. The relevant light will light
up accordingly as indication.
PRE-SETTTING BUTTON
Before operated the fan press this button to preset the running time from 0.5 to 10 hours.
The relevant light will light up accordingly as indication.
WIND TYPE BUTTON
Press this button to choose the wind type you like. There are three types of wind available:
normal, natural and sleep type.
OFF BUTTON
Press this button to turn off the fan.
Remote Control
Timer Button: It is used for time setting of the fan. The time settings range from 0.5 to 1Oh.
OFF Button: When the fan needs to be off, Press this button, the fan will stop all the
operating functions.
Swing Button: When the fan is on, press this button, the fan will get into swing, when no
need swing, press this button again, the fan will stop swing.
Mode Button: it is used for three special settings: sleep, normal, natural.
On/Speed Button: Press this button when the fan is off. When the fan is on the computer
CMOS chip will auto set the speed at the slow position at the same time to change the speed.