Heinner HWM-8014, Руководство пользователя

Страница: 42 / 100

www.heinner.com
41
- Jeans
This program is specially designed for washing jeans.
- Hand Wash
For few light dirty clothes, the default temperature of washing is cold.
- My Cycle
Press Spin 3sec. for my cycle to memory the procedure. The default my cycle is cotton.
The main function can be selected as follows:
- Prewash
The Prewash function can get an extra wash before main wash.
- Speed Wash
The function can decrease the washing time.
- Extra Rinse
The laundry will undergo extra rinse once selected.
- Delay
Delay function can be set with this button, the delaying time is 0-24 H. Set the Delay function:
1. Select a programme;
2.Press the Delay button to choose the time;
3.Press Start/Pause to commence the delay operation.
Cancel the Delay function: Press the Delay button until the display will be 0H. It should be pressed
before starting the program. If the program already started, should press the On/Off button.
Notes: If there is any break in the power supply while the machine is operating, a special memory
stores the selected programme and when the power is restarted, press the Start/Pause to resume
operation.
- Reload
This operation can be executed during the washing procedure. When the drum of the washing
machine is still rolling and there is large amount of water with high temperature in the drum. The
state is unsafe and the door cannot be opened forcefully. To press
《
Start/Pause
》
for 3 sec. to reload,
and start the clothes adding in the midway function.
Please follow the steps as bellow:
1.Wait until the drum stops rotating.
2.The door lock is unlocked.
3.Close the door when the clothes needs are loaded and repress the
《
Start/Pause
》
button.
- Child Lock
To avoid faulty operation of the washing machine due to operation by kids during the washing
procedure, you can select this function. In this case, the other buttons except On/Off button can not
work. At this state, the machine will power off when the on/off key is pressed. The machine
remembers the program. Press Extra Rinse and Pre Wash together 3 seconds during the running
procedure; the buzzer will beep. Start/Pause button as well as the rotary switch are locked. Press the
two buttons for 3 seconds together and buzzer will beep to release to locking. In case of interruption
of power supply, the lock will be deactivated. Lock will be released after completion of the program.