1000W, 50/60Hz, 220-240V
36
S/N Problem
Reason
Solution
1
Difficult to close the
lid
Sealing ring not installed
properly
Position the setaing ring well
The floater valve clamps
the push rod
Lightly push the push rod
2
Difficult to open the
lid
Float valve in the
popped-up position
Press the float valve lightly
with a chopstick.
Pressure exists inside
the cooker
Open the lid after the pressure is
completely released.
3
Steam leaks from the
lid
Sealing ring installed
improperly
Install the sealing ring as required
Food debrits attached to
the sealing ring
Clean the sealing ring
Sealing ring damaged
Replace the sealing ring
The lid is not closed
correctly
Close the lid correctly
4
Steam leaks from float
valve
Food debris on the float
valve gasket
Clean the float valve gasket
Float valve gasket
worn-out
Replace the float valve gasket
5
Float valve unable to
rise
Too little food and
water in inner pot
Add water and food according
to the recipe
Steam leaks from the lid
or exhaust valve
Send to the service center for repair
6
Steam comes out
from exhaust valve
non-stop
Exhaust valve not in
sealing position
Turn the exhaust valve to the
sealing position
Pressure control fails
Send to the service center for repair
7
Power indicator
doesn’t light on
Power socket bad
contact
Please check the power socket
8
Rice half cooked or
too hard
Too litter water
Add water accordingly
Lid opened prematurely
After cooking cycle completes,
leave the lid on for 5 more minutes
9
Rice too soft
Too much water
Reduce water accordingly
VII. TROUBLESHOOTING
