1000W, 50/60Hz, 220-240V
29
NOTE:
1.Exhaust valve: Pull out the exhaust valve from the lid. Clean the internal side of the
exhaust valve and the exhaust valve and float valve of the lid with brush and cloth at
least once a month.
2.Sealing gate: Please remove oil and dirt from the sealing gate with detergent and
brush. The remained oil and dirt in it may appear in yellowish. After washing, it may
recover to the original color as stainless steel. It is suggested to clean the sealing gate
once every 2 months.
Structural diagram of float valve
Tips:
Confirm that the float valve, block proof cover and seal ring are correctly installed
before use each time. Before putting the inner pot into the cooker each time, please
remove the dirt and water from the external side of the inner pot and internal side of
the external pot. Please move the product with the handle of the cooker body. Please
remove the water from the housing cover with cloth.
BEFORE USING THE PRODUCT
For initial use, remove from the pot all the accessories, read the User Manual carefully,
and pay particular attention to the use methods and precautions to avoid damage to
your property or personal injury.
CONTROL PANEL
„KEEP WARM/ CANCEL” button
In standby mode, press this button to enter the Keep Warm condition; In non-standby
state, you can cancel any operation that the electric pressure cooker is performing.
“Preset” “+” “-” button
To preset, after selection of the function, press the “Preset” button. (Some functional
items can not be preset) to adjust the preset time, press the “Preset” button, then press
“+” “-” button to set the hour portion preset button, then press “+” “-” button to set the
hour portion preset adjustment; press the “Preset” button, then press “+” “-” button to
set minute portion preset adjustment.
“Texture” button
Some functions of the product have full tasty function selection, and press this button
to select your desired tastes of “Light”, “Standard” and “Strong”.
V. USING THE APPLIANCE
