Heinner HPAC-09WH, Руководство пользователя

Страница: 19 / 108

www.heinner.com 9000 BTU, 220-240V~50Hz
18
VIII. USING THE APPLIANCE
NOTE: The following control panel is for explanation purpose only. The control panel of
the unit you purchased may be slightly different according to the models. Your machine
may not contain some indicators or buttons. The actual shape shall prevail.
MODE button
Selects the appropriate operating mode. Each time you press the button, a mode is
selected in a sequence that goes from COOL, FAN, DRY.
The mode indicator light illuminates under the different mode setting.
NOTE: On above modes, the unit operates the auto fan speed automatically.
Up (+) and Down (-) buttons
Used to adjust (increasing/decreasing) temperature settings in 1°C increments in a range
of 17°C to 30°C.
NOTE: The control is capable of displaying temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press and hold the Up and Down buttons at the
same time for 3 seconds.
Power button
Power switch on/off.
LED display
Shows the set temperature while on cool or auto mode. While on DRY and FAN modes, it
shows the room temperature.
Shows Error codes:
- E0 - EEPROM error.
- E1 - Room temperature sensor error.
- E2 - Evaporator temperature sensor error.
- E3 - Condenser temperature sensor error (on some models).
- E4 - Display panel communication error.
- EC - Refrigerant leakage detection malfunction (on some models).
Power indicator light
Timer mode indicator light (set only by remote controller)