Heinner HOH-Y13S, Руководство пользователя

Страница: 15 / 34

www.heinner.com 2500W, 220-240V~50Hz
6. Repeat 2, 3, 4 and 5 on the rear of radiator for mounting of the rear castors.
Note: the rear castors must be mounted between the end two fins.
USING THE APPLIANCE
1. Before using the heater, make sure that it is on a flat and stable surface. Damage may
occur if it is placed on an incline or decline.
2. Set all the controls to OFF position and insert the plug into a socket-outlet with well
grounded. Be sure that plug fits firmly.
3. Rotate the thermostat knob clockwise to MAX position and switch the heater on as
follow: the switch I for low heat, the switch II for medium heat and both switches on for
high heat. (Especially: for YL-A09 series, the power switch is a knob)
4. When your room reaches the desired temperature, now slowly rotate the thermostat
knob counter clockwise until the pilot light goes out. The thermostat can now be left at
this setting. As soon as the room temperature has dropped below the set temperature,
the unit will switch it self on automatically until the set temperature has been reached
again. In this way the room temperature remains constant with the most economical use
of electricity.
5. If you want to change the room temperature setting, rotate the thermostat knob
clockwise to raise the temperature, or counter clockwise to lower it.
6. This heater includes an overheat protection system that shuts off the heater when parts
of the heater are getting excessively hot.
7. To completely shut the heater off, turn all the controls to OFF, and remove plug from
the socket-outlet.