11
CLEANING AND MAINTENANCE OF THE OVEN’S FRONT DOOR GLASS
Remove the profile by pressing the plastic latches on both left and right sides as shown
in Figure 21 and pulling the profile towards yourself as shown in Figure 22. Then remove
the inner-glass as shown in Figure 23. If required, middle glass can be removed in the
same way. After cleaning and maintenance are done, remount the glasses and the profile
in reverse order. Make sure the profile is properly seated in its place.
Figure 21 Figure 22 Figure 23
Rack positions
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure, first remove the
lower, and than the upper side from installation location. To install wire racks; reverse
the procedure for removing wire rack.
Changing the oven lamp
Warning: To avoid electric shock, ensure that the appliance circuit is open before
changing the lamp. (having circuit open means power is off) First disconnect the power
of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure on the left side. If you
have difficulty in turning, then using plastic gloves will help you in turning.
Then remove the lamp by turning, install the new lamp with same specifications.
Reinstall glass protection, plug the power cable of appliance into electrical socket and
complete replacement. Now you can use your oven.
It is important to place the wire grill
into the oven properly. Do not allow
wire rack to touch rear wall of the
oven. Rack positions are shown in the
next figure. You may place a deep tray
or a standard tray in the lower and
upper wire racks.
Rack 4
Rack 3
Rack 2
Rack 1
