26
Gas hose passage way
Nozzle change operation
3.
Please use driver with special head for removed and install nozzle as (figure 3).
4.
Please remove nozzle (figure 4) from burner with special nozzle driver and install new
nozzle (figure 5).
Connect the appliance to the gas piping tap in
shortest possible route and in a way that ensure
no gas leakage will occur.
In order to carry on a tightness and sealing safety
check ensure that the knobs on the control panel
are closed and the gas cylinder is open.
WARNING: While performing a gas leakage check,
never use any kind of lighter, match, cigarette or
similar burning substance.
Apply soap bubble on the connection points. If
there is any kind of leakage then it will cause
bubbling.
While inserting the appliance in place ensure that
it is on the same level with the worktop. If
required adjust the legs inorder the make level
with the worktop.
Use the appliance on a level surface and in a well
ventilated environment.
Warning: Before placing the appliance, check that
the local distribution conditions (gas type and
pressure) conform to the product settings.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
