Heinner HEMA-2500, Руководство пользователя, Страница: 54 / 59

www.heinner.com 1300W, 50-60Hz, 220-240V
53
8 Warning Water
Pipe Block
Coffee machine is stored for a long time and
not work. The machine is not cleaning before
storing. Result the holes of filter is blocked.
After start appliance, the pump will pump
water for three times, and the coffee outlet will
not be water flowing out, after a few seconds,
the display is showing
＂
Warning Water Pipe
Block
＂
１．
Press the
＂
ESC
＂
button
to return to the standby state
，
remove the brew group and
clean the filter
２．
Operate according to the
section of START APPLIANCE,
the coffee machine will operate
normally.
The machine is stored for a longtime, when
start appliance, the noise of pump has
obviously increase, and the pumping water is
not three times, the coffee outlet has not water
flowing out, after a few seconds, the display
will show “Warning Water Pipe Block
＂
.
１．
Press the
＂
ESC
＂
button to
return
，
when the machine
enters the standby state, turn
on the steam control knob to
making hot water for 10s, then
turn off it, repeat for
４～５
cycles, the coffee machine will
operate normally.
When rinse machine state or making coffee
state, the pump is working normally, but it will
not pump water for three times, the coffee
outlet has a little coffee flowing out, after a few
seconds, the display will show “Warning Water
Pipe Block
＂
. The flow meter is malfunction
Send to the service center for
changing the flow meter.
The four orientation grooves has foreign
objects, the water tank cannot be positioned in
place properly, the anti-drip valve cannot be
opened
Removing out the foreign
objects.
9
Warning
Clean Dregs Box
After every making ten cups coffee
，
the LCD
will display it.
You shall open the side door
and remove the dregs box and
empty the dregs, then replace it
into the machine, the appliance
will operate normally.
10 Warning
Sensor short
It prompts the temperature sensor in the
coffee machine is short circuit.
Send it to service center.
11 Energy Saving
Any Key Return
It prompts the machine is on the energy saving
mode
Press any key to return to the
working state.
12 Warning
High temperature
It prompts the temperature in the appliance is
too high.
Cut the power off, and wait it
cool down.