www.heinner.com 850W, 50Hz, 220-240V
7
VI. CLEANING AND MAINTENANCE
1.
Cut off power source and let the coffee maker cool down completely before cleaning.
2.
Clean housing of coffee maker with moisture-proof sponge often and clean water
tank, drip tray and removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in
water for cleaning.
3.
Detach the metal funnel by turning it clockwise, get rid of coffee residue inside, then
you can clean it with cleanser, but at last you must rinse with clear water.
4.
Clean all the attachements in the water and dry thoroughly.
CLEANING MINERAL DEPOSITS
1. To make sure your coffee maker operating efficiently, internal piping is cleanly and the
peak flavor of coffee, you should clean away the mineral deposits left every 2-3 months.
2. Fill the tank with water and descaler to the MAX level (the scale of water and descaler
is 4:1, the detail refers to the instruction of descaler. Please use “household descaler”,
you can use the citric acid (obtainable from chemist’s or drug stores) instead of the
descaler (the one hundred parts of water and three parts of citric acid).
3. According to the program of pre-heating, put the metal funnel (no coffee powder in it)
and jug in place. Brewing water per “PRE-HEATING”.
4. Press the Power switch one time, its red lamp will be illuminated, you should press the
pump control switch, maker sure the coffee/steam selector to the “
” position, when
there is water flowing out and close the pump, and wait for a moment, the coffee maker
begins to be heated.
5. When the lamp in pump control switch is illuminated, it shows the heating is finished.
Pressing the pump control switch to “
” position and make two cups coffee (about
60ml). Then close the pump and wait for 5s.
6. Press the coffee/steam selector to the “
” position, the indicator in the pump control
switch will be extinguished, waiting for until the indicator in the coffee/steam selector is
illuminated. Make steam for 2min by turning the steam control knob, then turn the
steam control knob to “o” position to stop making steam. Press the Power switch for stop
the unit immediately, make the descalers deposit in the unit at least 15 minutes.
7. Restart the unit and repeat the steps of 4-6 at least 3 times.
8. Then press the coffee/steam selector to“
”position, the lamp in pump control switch
will be illuminated, then press the pump control switch to “
” position to brew until no
descaler is left.
9. Then brew coffee (no coffee powder) with tap water in the MAX level, repeat the steps
of 4-6 for 3 times (it is unnecessary to wait for 15 minutes in step of 6), then brew until
no water is left in the tank.
10. Repeat the step of 9 at least 3 times to make sure the piping is clean.