www.heinner.com 850W, 50Hz, 220-240V
4
MAKING ESPRESSO COFFEE
1.
Remove the funnel by turning it clockwise. Add ground coffee to steel mesh with
measuring spoon, a spoon ground coffee power can make about a cup of top-grade
coffee, then press the ground coffee powder tightly with the tamper.
2.
Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in
the appliance, then insert the funnel into the appliance from the “Insert” position, and
you can fix them into coffee maker firmly through turn it anticlockwise until it is at the
“Lock” position.
3.
Pour out the hot water in the cup. Then place the hot cup (your cup) on removable cup
shelf.
4.
At the time, the lamp in pump control switch shall be illuminated, if it is extinguished,
wait for a moment, once the lamp in it is illuminated, you should press the pump control
switch on the “
” position, wait for a moment, there will be coffee flowing out.
Note: During operation, if the indicator is extinguished, you must close the pump and
stop to make espresso coffee. After a few seconds, if the lamp is illuminated again, you
can make espresso coffee continued by pressing pump control switch to “
” position,
the lamp is cycle on and off to maintain the water temperature is hot enough.
5.
You should press Power switch to “
” position manually when desired coffee is
obtained or the colour of coffee changes weak obviously, all indicators go out and the
coffee maker stops working, your coffee is ready now.
WARNING: Do not leave the coffee maker unattended during making the coffee, as you
need operate manually sometimes!
6.
After finishing making the coffee, you can take the metal funnel out by turning it
clockwise, then pour the coffee residue out with the steel mesh pressed by press bar.
7.
Let them cool down completely, then rinse under running water.