Heinner HEM-350RD, Инструкция по эксплуатации, Страница: 18 / 41

www.heinner.com 220-240V~50Hz, 800W
C. FROTHING MILK/ MAKE CAPPUCCINO
You get a cup of cappuccino when you top up a cup of espresso with frothing milk.
Method:
1. Prepare espresso first with container big enough according to the part “ B. MAKE ESPRESSO
COFFEE ” .
2. Fill a jug with desired amount of milk for each cappuccino to be prepared, you are recommended to
use whole milk at refrigerator temperature (not hot!).
Note: In choosing the size of jug, it is recommend the diameter is not less than 70±5mm, and bear in
mind that the milk increases in volume, make sure the height of jug is enough.
3. Turn the steam knob to the position, the indicator will light up.
4. Insert the frothing device into the milk about two centimeters, after about 2 minutes, the steam
will come out from the frothing device. Froth milk in the way moving vessel round from up to down.
Note: Please don ’t fill too much water (should be≤200ml), otherwise the steam amount will be little,
and the water content in frothing milk will be too much.
5. When the required purpose is reached, you can turn the steam control knob to position stop
frothing. Then remove the jug and turn the steam control knob to position release the residual
steam in the tank.
Note:
a. Clean steam outlet with wet sponge immediately after steam stops generating, but care not to
hurt!
b. You can only open the tank cover after you drain the water vapor and release the pressure.
6. Pour the frothed milk into the espresso prepared, now the cappuccino is ready. Sweeten to taste
and if desired, sprinkle the froth with a little cocoa powder.
Note: We recommend you allow the appliance to cool down before making coffee again. Otherwise
burnt odor may occur in your espresso coffee.
7. After turning the knob to coffee position or steam position, the unit will power off automatically
after 25 minutes.