www.heinner.com 1800-2000W, 220-240V~50/60Hz
After unpacking:
•
Inspect the device for visible damage. Do not forget to unpack the two feet.
Mount them at the bottom of the unit.
•
Connect the power cord directly into a grounded outlet.
•
Connect the unit to a properly installed power outlet (220V).
•
After use, remove the plug from the socket.
1.
Before using the heater as a standalone unit, you must mount the feet.
2.
As shown in the figure Please screw these four screws out first.
3.
Attach the feet to the bottom with the four supplied self-tapping screws. Make sure
that the screws are installed in the correct position on the lateral parts.
