www.heinner.com 1800-2000W, 220-240V~50/60Hz
III. SAFETY MEASURES
•
Before any use, refer to the corresponding section in this user manual.
•
In accordance with European directives applicable to this product.
•
Warning: In order to avoid overheating, do not cover.
GENERAL SAFETY INFORMATION
1. This device may not be operated:
- Are in rooms that fire or explosion risk from chemicals, dust, gases or vapors;
- Lead or in the immediate vicinity of pipes or containers, flammable or explosive
substances.
2. Place the heater on a firm, level ground.
3. Do not insert objects through the ventilation slots of the device.
4. The heater is not designed for use in bathrooms, washrooms or other damp
areas. Set the heater on so that the unit in water tank (bath, ...) or the like may
fall.
5.
WARNING: The free air outlet must not be affected. Therefore, the upper
and grilles of the unit may not quite yet be partially covered for safety reasons.
6. After use, turn the power zurerst, then unplug the power cord..
7. Make sure that the power cord does not touch the radiator. Place the unit
directly under a wall outlet.
8. Check before you use the appliance if the mains voltage with which you want to
operate the device matches the specified on the nameplate of the device voltage!
9. The convector is used solely for heating or tempering of rooms. The device is
intended for normal household use and similar purposes.
10. Never operate the appliance unattended.
11. The noise after turning on / off of the unit is normal.
12. The device may only be opened and repaired by a specialist.
13. If the supply cord is damaged, contact the device to come into operation. Let's
replace the cable by qualified personnel.
14. Never pull on the cord to move the device! Make sure that does not happen to
be the connecting cable gets stuck somewhere and doing this for the case of the
device could!
15. Keep a safe distance from 1 m around the device.
