Heinner HCM-1100D, Инструкция по эксплуатации

Страница: 17 / 55

www.heinner.com 900W, 50Hz, 220-240V
16
WARNING: Make sure the machine is unplugged before cleaning. To protect against
electrical shock, do not insert the power cord, plug or unit in water or any other liquid.
1) Clean all removable parts after each use in hot, soapy water.
2) Wipe the outer surface of the product with a soft damp cloth to remove stains.
3) During the cooking process can be in the form of drops of water can flow over the filter
and the base of the device. To control leakage drops wipe the surface clean with a dry cloth
after each usage.
4) Use a damp cloth to wipe carefully heated plate. Never use abrasive cleaners.
VIII. CLEANING AND MENTENANCE
IX. CLEANING MINERAL DEPOSITS
To maintain efficient operation of filter coffee, you should regularly clean the mineral
deposits left by water, depending on water quality in your area and frequency of usage.
Proceed as follows:
1. Fill the bowl with some white vinegar and three parts cold water
2. Pour water and vinegar mixture in the tank, do not put ground coffee in the filter, turn
on the camera and follow the "Instructions for Use ", repeat the process until no longer
flows out yellow liquid discard the mixture of vinegar and water, pour tap water in
procestul tank and repeat until the water comes out it will not taste like vinegar.
3. Press the ON / AUTO / OFF once and BREW indicator will be illuminated red. After a
while the water will drop automatically.
4. After filtering the equivalent of a glass, turn the power off by pressing again the ON
/ AUTO / OFF and BREW indicator will win over.
5. Allow a 15 minute break and then repeat steps 3-5.
6. Turn the camera on again by pressing the ON / AUTO / OFF and let the water in the
tank to leak, this pan is completely empty needles.
7. Before use, rinse at least three times.