Heinner HCM-1100D, Инструкция по эксплуатации

Страница: 16 / 55

www.heinner.com 900W, 50Hz, 220-240V
15
If you do not want the coffee maker to start immediately, you can set automatic start
function in the following way: for example, it is currently 5:10 PM, and if you want the
coffee maker to start automatically at 08.15PM, follow the steps below:
1. Press PROG once word clock will be displayed on the top right corner of the screen.
2. Desired start time can be set by pressing the "Hour" and "MIN" to run the numbers.
Note: Cycle time is 24 hours.
3. Press again "PROG" (program), and "TIMER" the (timer) will be displayed. This shows
that you enter the "Set automatic start" (setting automatic start).
4. Set the start time delayed by repeatedly pressing the "HOUR" and "MIN", which is
20.15 (Fig. 2).
5. Press the ON / OFF twice, thereby AUTO indicator will light up. After about 10 seconds,
the LCD will display the current time.
VI. AUTO START FUNCTION
VII. MEMORY
If, during the operation of the appliance, the power supply has been interrupted or the power
cord has been disconnected from electricity unintentionally, the machine will automatically
continue brewing. If the pause time is more than 15 minutes, the display shows the default
setting, the unit must be reprogrammed.