6
V.
CLEANING AND MAINTENANCE
VI.
INSTALLATION
•
For electrical connection carefully, follow the instructions given in this manual.
•
Unpack the appliance and check if there are damages on it.
•
Do not connect the appliance if it is damaged. Report possible damages immediately
to the place you bought it. In this case retain packing.
•
It is advisable to wait at least four hours before connecting the appliance to allow the
oil to flow back in the compressor.
•
Adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation, follow the instructions relevant to
installation.
•
Wherever possible the back of the product should not be too close to a wall to avoid
touching or catching warm parts (compressor, condenser) to prevent the risk of a fire,
follow the instructions relevant to installation.
•
The appliance must not be locate close to radiators or cookers.
•
Make sure that the mains plug is accessible after the installation of the appliance.
•
Before maintenance, switch off the appliance and disconnect the mains plug from the
mains socket.
•
Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic
solvents or abrasive cleansers.
•
Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
