4
Instruction manual XTRA
1.2 Intended Use
The shearing machine is intended exclusively for use on sheep and goats, as well as llamas,
alpacas and other members of the camel family. Its use can also be extended to cattle and
horses by changing the standard shearing head.
Other uses, in particular using the machine on people, are expressly prohibited.
1.3 Technical Data
Model Designation:
VS84-S (Shearing)
Mains Voltage:
Motor Output:
RPM:
Fuse Protection Needed:
Dimensions (W/H/L):
approx. 80 mm x 95 mm x 350 mm
Weight, excluding cable:
1560 g
Max. Ambient Temperature:
0°C - 40°C
Max. Air Humidity:
10% - 90% (relative)
Noise Emission (L
pAm
):
93 dB(A) (DIN-45635-1/04.84 + BG-PAS 26)
Acceleration (a
vhw
):
11 m/sec
2
(EN-28662-1/01.93)
1.4 Equipment Items
1 Shearing Machine with Shearing Head, 1 Pair of Shearing Blades, 1 Special Screwdriver,
1 Bottle of Special Lubricating Oil, 1 Cleaning Brush, 1 Set of Operating Instructions,
1 Transport and Storage Case
Options:
• Alternative exchangeable clipper head (for cattle and horses)
• Various sh clipper blades
2 Safety Regulations
2.1 Introduction
This section describes the mandatory safety regulations which must be observed when using
the shearing machine.
All persons undertaking work on or with the machine have an obligation to
read the operating instructions.
The operating instructions must be kept safely in the storage case and acces-
sible at all times.
2.2 Symbols and Warning Signs
Various symbols are used in the operating instructions. They refer to potential dangers or
point to technical information, the non-observance of which will lead to personal injury,
damage to objects or inefficient operation.
see rating plate
BA XTRA englisch_BA XTRA englisch 06.09.11 11:10 Seite 4