Heiniger TPW Aussie Xpress, Руководство оператора

Страница: 6 / 25

MA005 TPW Woolpress Operator Manual 2019-06-06
Rev:05
6
5 Guarantee
5.1 Introduction
HEINIGER Australia guarantee the 'TPW Woolpress" manufactured by them to be free from
defect in workmanship and materials. Their obligations pursuant to this guarantee are
limited to the repair or replacement of parts and workmanship which prove defective within
the specified period.
The repair or replacement shall be affected upon the defective equipment being returned
freight pre-paid to the registered office of HEINIGER Australia or New Zealand or when
authorised to the authorised Service Agents.
All travelling costs incurred by Service Agents performing repairs under warranty will be the
owner’s responsibility.
Where HEINIGER Australia supplies goods not manufactured by HEINIGER Australia, the
customer shall only be entitled to such benefits as HEINIGER Australia may receive under
guarantee as given to HEINIGER Australia by the manufacturer of those goods.
Some parts not covered by HEINIGER Australia
Hydraulic Cylinder, Hydraulic hoses, Electric motor, Hydraulic pump assembly, Hydraulic
control valve, Starter switch, Scale components.
(These parts generally have to be sent back to the manufacturer for warranty inspection
and assessment)
5.2 Guarantee period on parts manufactured by HEINIGER Australia
Primary producers: 25 months from the date of delivery.
Contractors: 12 months from the date of delivery.
5.3 Conditions
This guarantee will be invalidated for any of the following reasons:
1.
If notice of the defect is not given to HEINIGER Australia or New Zealand within the
guarantee period.
2. If the woolpress has been subject to misuse, abuse, negligence or accident.
3. If the woolpress is installed, maintained or operated in any manner other than that for
which it is designed.
4. If the woolpress is used for any duty or subjected to any abnormal operating conditions
varying from that for which it is supplied by HEINIGER Australia.
When making a warranty claim or ordering new parts, it is important that the serial number
of the unit is quoted and the date of purchase stated.
6 Technical data
6.1 Dimensions
Height operational: 2705mm
Height shipping: 1970mm
Box height: 1185mm
Length: 1390mm
Width: 970mm
Weight: 530kg
6.2 Electric
Motor: Teco Induction
Electric: 4kw (5.5hp), 415V, 3Ø, 1440rpm
Electric: 2.2kw (3hp), 240V or 480V at 1460rpm
Electrical operating voltage and current:
Nominal
Min Volts Return stroke Full load
Volts Full load Current Current
240 V 220 V 11.0A 16.0A
480 V 440 V 6.0A 8.0A
415 V 8.0A 8.0A