Heiniger TPW Aussie Xpress, Руководство оператора

Страница: 5 / 25

MA005 TPW Woolpress Operator Manual 2019-06-06
Rev:05
5
3 Accepting delivery
All units are transported at the owner's risk.
Before accepting delivery, thoroughly inspect the Woolpress for damage.
If any has occurred you should note the nature and extent of the damage in view of any
insurance claim you may wish to make.
Whilst all care is taken during manufacture and by our agents to ensure your woolpress
arrives in perfect working order and condition, damage occurring during transit or faulty
operation resulting from damage occurring during transit will not be covered by our
warranty.
The following areas should be checked carefully:
➢
Guide rods, including the return bolt and the adjustable pinning lug, these must be
present and secure.
➢
The pinning guards. They should locate securely in place.
➢
Check scale components, indicator, cords and fittings.
➢
Electrical components etc (where fitted).
➢
Petrol Engine (when fitted).
➢
All ancillary equipment, i.e. panels, axles, wheels, jockey wheel, etc
➢
Hydraulics, Check for leakage at all connections and damage to hoses etc.
➢
Check fluid levels.
➢
Check that safety devices are operating correctly.
➢
Electric motor (where fitted) Fan cover etc.
4 Transporting.
The TPW Woolpress is supplied on transport skids. It is advisable to use the transport skids
whenever practicable when transporting the woolpress.
Ensure that there is no load on the load cell or wheels and the hydraulic cylinder is lowered.
A Woolpress Trolley is available, to enable easy movement from shed to shed. The trolley
should only be used when it is safe to do so.
When moving the press with the transport skids fitted it is advisable to:
➢
Use only a forklift truck that is adequate for the task.
➢
Use only a driver qualified to operate the forklift truck.
➢
Only move over a stable, level surface.
➢
Lift only from the bottom of the woolpress between the transport skids and the base of
the press.
➢
Lift only from the front or rear of the woolpress.
➢
Spread the forks as wide as possible within this space.
➢
Ensure that the woolpress is fully on the forks before lifting.
➢
Keep the woolpress as close to the ground as possible when moving.
➢
Move no faster than walking pace.
➢
Take care when turning corners and stopping as the woolpress may slide on the forks.
➢
Lower the woolpress gently.
➢
Only lower the woolpress onto a stable, level surface.
Because of the woolpresses height and centre of gravity when the hydraulic cylinder is in its
operating position it can be unstable when being moved, for this reason it is advisable to
fold the cylinder down when transporting.
Even when the cylinder is folded down care needs to be taken when transporting.
When the press is delivered from the factory the cylinder will be in the folded down position.