Removing the limitation
For this purpose, the corresponding
economy clip must be pulled back up
to the stop with your thumb. Any
desired temperature setting can now
be made.
Blocking of a
temperature setting
For blocking a temperature setting
both economy clips must be pulled
back (please see fig. 1), the clips must
be lifted and removed (please see
fig. 2).
The thermostatic head must now be
turned to the desired temperature set-
ting, e.g. index-figure 3 = 20°C. Then
the
red economy clip
is to be inser-
ted in the groove right of the index
figure 3 (please see fig. 5) and be
pushed forward up to the stop. The-
reafter the
blue economy clip
must
be inserted in the groove left of the
index figure 3 (please see fig.5) and
be pushed up to the stop. The ther-
mostatic head cannot be deregulated
in any direction.
Removing of the blocking.
For this purpose the
red
and the
blue
or, if need be, both economy clips
must be pulled back up to the stop.
Any desired temperature setting will
now be possible again.
Limiting of a Temperature
Setting
Upper limiting
of the temperature range
In this case the
red economy clip
must be pulled back up to the stop
(please see fig. 1), lift and remove it
(please see fig. 2). Then the ther-
mostatic head can be turned to the
desired temperature, e.g. index
figure 3 = 20°C. Afterwards the
red economy clip
must be inserted in
the groove right to the index figure 3
(please see fig. 3) and the clip pushed
forward up to the stop.
Now every temperature setting up to
the index figure 3 will be possible
when turning the thermostatic head.
Any temperature setting above the
index figure 3 will be impossible.
Lower marking
of the temperature range
For this purpose the
blue economy
clip
must be pulled back with your
thumb up to the stop, lift and remove
the clip. The thermostatic head can
now be turned and set to the desired
temperature, e.g. moon symbol=14°C.
Thereafter, the
blue economy clip
must be inserted left to the moon
symbol (please see fig.4) and the clip
be pushed forward up to the stop.
Now any temperature setting can only
be made up to the moon symbol by
turning the thermostatic head. Tempe-
rature settings which are below the
moon symbol can only be made after
removing the said limitation.
9
