Heidolph 036308001, Руководство по эксплуатации

Страница: 104 / 157

104
5 Operating and display elements
5.1 Operating elements
The operating elements are located on the controller front.
controller figure

see chapter 3.1 Vacuum controller Hei-VAC Control on page 95
5.1.1 Selection knob
The selection knob of the controller is a combination of rotary
knob and push-button.
Selection knob Meaning
Press – Selection knob =
`
Call up menu or function.
`
Exit menu or function.
`
Confirm and store setting or selection.
`
Step to next menu, function or content.
`
Call up Configuration menu while booting.
Turn –
Selection knob
=
`
Select menu, navigation function.
`
Value setting – increase/decrease.
`
Adapt set vacuum (in mode Vac control).
5.1.2 Control panel
Key Meaning
On/Off
`
Switch on/off controller.
Start/Stop
`
Start/stop vacuum control.
`
Confirm completed program when clock icon blinks.
`
Confirm error and status indications.
VENT
– system venting;
`
Keystroke < 2 sec = momentarily venting, control conti-
nues.
`
Keystroke > 2 sec = venting to atmospheric pressure
(max. 1050 mbar/787 Torr), control stops.
`
Keystroke while venting = venting stops.
Press selection knob
Turn selection knob
Control panel keys