manualshive.com logo in svg

HEIDENHAIN TNC 407, Руководство пользователя

Поделиться
Скачать
HEIDENHAIN TNC 407 Скачать руководство пользователя страница 81

TNC 426/TNC 425/TNC 415 B/TNC 407

2 - 2 0

2

Manual Operation and Setup

I

or

2.6 Measuring with a 3D Touch Probe

With a 3D touch probe you can determine

• position coordinates, and from them,
• dimensions and angles on the workpiece.

To find the coordinates of a position on an aligned workpiece:

Select the probing function with the soft key PROBING POS.

Move the touch probe to a position near the touch point.

X +      X –      Y +      Y –      Z +      Z –

Select the probe direction and axis of the coordinate.

Probe the workpiece.

The TNC shows the coordinates of the touch point as DATUM.

Finding the coordinates of a corner in the working plane

Find the coordinates of the corner point as described under “Corner as
datum.” The TNC displays the coordinates of the probed corner as
DATUM.

Содержание TNC 407














































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды