manualshive.com logo in svg

HEIDENHAIN TNC 407, Руководство пользователя

Поделиться
Скачать
HEIDENHAIN TNC 407 Скачать руководство пользователя страница 4

TNC 426/TNC 425/TNC 415 B/TNC 407

How to use this manual

This manual describes functions and features available on TNCs as of the following NC software numbers:

NC Software No.

TNC 407

280 580 04

TNC 415 B, TNC 425

280 540 04

TNC 415 F, TNC 425 E

280 560 04

TNC 426 CA, TNC 426 PA

280 462 01

TNC 426 CE, TNC 426 PE

280 482 01

The suffixes E and F indicate export versions of the TNC.

The export versions TNC 415 F, TNC 425 E, TNC 426 CE, and
TNC 426 PE have the following limitations:

• Input and machining accuracy are limited to 1 µm
• Simultaneous linear movement in up to 4 axes

Some of the functions described in this manual are not available on all
TNCs. These functions are marked with symbols:

Function not available on the TNC 407

Function not available on the TNC 415

Function not available on the TNC 425

Function not available on the TNC 426

The machine manufacturer adapts the features offered by the TNC to the
capabilities of the specific machine tool by setting machine parameters.
This means that not every machine tool will have all of the functions
described in this manual.

Some of the TNC functions which are not available on every machine are:

• Probe functions for the 3D touch probe
• Digitizing option 

(conversational programming only)

• Measuring tools with the TT 120 touch probe

(conversational programming only)

• Rigid tapping
• Re-approaching a contour after an interruption

Your machine manual provides more detailed information. If you think a
function may be unavailable because of a defect, please contact the
machine tool builder.

Many machine manufacturers and HEIDENHAIN offer programming
courses for the TNCs. We recommend these courses as an effective way
of improving your programming skill and sharing information and ideas with
other TNC users.

407

415

425

426

Содержание TNC 407














































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды