HEIDENHAIN QUADRA-CHEK 100, Руководство по эксплуатации, Страница: 40 / 81

Chapter 3 Communications
3-2
Print section of Setup menu: Print section of Setup menu: Print section of Setup menu: Print section of Setup menu: Print section of Setup menu:
Line terminator: Select carriage return or Carriage
return/Line feed to terminate each line of data.
Print axis labels: Include (or suppress) axis labels in data.
Print axis units: Include (or suppress) axis units of measure in
data.
PPPPPorts section of Setup menu: orts section of Setup menu:
orts section of Setup menu: orts section of Setup menu: orts section of Setup menu:
• Baud Rate: 9600
• Parity: No Parity
• Stop Bits: 2
• Data Bits: 8
In the following, the "v" means to ignore the character it is substi-
tuted for i.e., X, Y, Z, r, d, <, T, R, A, etc.
"d" means digit
"-" is the negative sign
"s" means space
"c" means carriage return
For positive outputs, the space character will be substituted for
the negative sign "-". The leading digits may be spaces.
When a QC100 is shipped from the factory, each output line is
terminated by a carriage return (ASCII 13).
The factory default is the DMS format.
In DMS (degree, minute, second) notation, the printout is as fol-
lows:
Character
Position: 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
Content: v v s - d d d . d d . d . s s s s s c
Example 1: <1 4 5 . 0 0 . 0 1
Example 2: A - 5 . 2 3 . 0 0
Print formats
Angular formats
Angle format (DMS)