HEIDENHAIN QUADRA-CHEK 100 Скачать руководство пользователя страница 30

Страница: 30 / 81

Chapter 2

Operation

2-10

Very little preparation is required before operating the QC100.

Connections to the system should be checked and power applied.

Checking connections

Perform a routine inspection of all connections to the digital read-

out system. Connections should be clean and tight. Cables should

be located away from moving objects and should not create trip-

ping hazards.

Cables connected to the parallel and serial (RS232) output ports

should be shielded and should be terminated and firmly connected

on both ends.

CAUTION

UTION

Never connect electrical cables to the system when the power

Never connect electrical cables to the system when the power
is on.

is on.

Applying power

To apply power, press the power

switch located at the back of the

enclosure to ON (1). The sys-

tem will initialize and display the

power-up screen.

Press any key on the front panel

to complete the system initial-

ization. The DRO screen will be

displayed showing the current

positions of encoders on each

axis.

NOTE

NOTE
If the encoders used with your system include reference marks,

If the encoders used with your system include reference marks,

If the encoders used with your system include reference marks,
you may be instructed to cross the reference marks on each

you may be instructed to cross the reference marks on each

you may be instructed to cross the reference marks on each
axis before the DRO screen is displayed.

axis before the DRO screen is displayed.

Getting started

Содержание QUADRA-CHEK 100


















































































Результаты поиска

Содержание QUADRA-CHEK 100

Отзывы:

HEIDENHAIN QUADRA-CHEK 100, Руководство по эксплуатации, Страница: 30 / 81

Результаты поиска

Содержание QUADRA-CHEK 100

Отзывы: