HEIDELBERG HRC, Руководство по установке

Страница: 26 / 39

HRC Installation Instructions Vers. 001 26
4.10 Installation of the HRC onto a Slit Lamp
Alternatively, the HRC can be mounted onto a slit lamp, and is thus in an anchored
position for stationary use.
Depending upon the slit lamp manufacturer or type, the following instructions for
mounting the HRC to a particular slit lamp may vary.
Provided here is a general instruction guideline for the purpose of this manual. A detailed
instruction manual for mounting each particular slit lamp adapter is included with
appropriate adapter shipment.
1. Connect the adapter to the body of the microscope with the screw knob (1).
2. Slide the HRC (F/A) onto both pins (2) of the adapter until it has resistance. The HRC
is fixed by magnet into this position.
3. To release the HRC, push the handle which releases the magnet (3).
4. To center the HRC with the slit lamp (only for anterior eye segment applications),
the lens for the anterior segment of the eye is attached to the HRC.
5. Should the slit lamp have a focus adjustment, it should be attached now.
6. The slit lamp is turned on and adjusted to show a small slit.
7. To focus, use the focus ring on the HRC objective lens tube. To center the slit light
view, adjust the screws (4) on the adapter accordingly.
8. Once you have the slit light view centered and focused, you can secure this setting
with the screw on the objective lens tube (5).
Should your slit lamp not have a focus adjustment, then you can focus and center the slit
light view by placing a piece of paper onto the headrest, viewing the slit light view through
the slit lamp’s microscope and making the appropriate focus adjustments by using the
cross sledge.
1
2
3
4
5