HEIDELBERG HRC, Руководство по установке

Страница: 22 / 39

4.4 Cable Connections
IMPORTANT: Before connecting the cables, be sure
the mains supply switch is turned OFF.
Ensure that the contact pins in the sockets are not bent or
otherwise damaged.
Both the sockets and the plugs have guides to ensure
alignment and when these are in the proper position, they
are easily connected without resistance.
IMPORTANT: Never use force to connect the cables.
NOTE: HRC and Spectralis devices can be operated
from the same PC using one HEYEX
installation. For further information, pleaser
refer to the “Supplement for installation of
Spectralis and HRC on the same PC”.
USB-serial adapter
If the PC/Laptop does not have a serial port, use a USB-serial adapter which gets delivered
with the HRC.
The PC interface cable of the HRC is connected to a USB port of the PC via the USB-serial
adapter.
To install the driver of the USB-serial adapter, insert the CD-ROM
“Software Device Driver
& Utilities Release 3.04”
into the CD drive and start the installation.
Figure 1a and 1b:
USB-serial adapter PC interface cable
HRC Installation Instructions Vers. 001 22