16
17
Miscellaneous
USB Volume
In the device menu you can activate the
USB Volume feature. That enables you to
control the volume of the device with a
connected USB source like a computer or a
streamer.
Warning: Always remember to check the
computer or connected device volume set-
ting before pressing play. When USB volume
is activated the amplifier will change its vol-
ume to the volume setting on the computer
or connected device.
Connecting a subwoofer
The most common way to connect a
subwoofer is from the variable line output
on your Hegel amplifier. If your subwoofer
is equipped with “high level” speaker wire
terminals you can also use this. Many sub-
woofer manufacturers recommend this type
of connection if it is available.
Please consult your subwoofer manual for
detailed instructions on how to connect and
configure your subwoofer for the best audio
result.
Power
All electrical components should be turned
off or in standby when not in use. This due
to safety, because all electrical components
can fail, and it is good for the environment.
Leaving your product on all the time could
also shorten the life expectancy of the
product.
That being said, our products sound even
better when they are warmed up, typically
after about 15 minutes of listening at a
moderate volume.
Connecting your TV
The best way to connect your TV is by us-
ing one of the optical inputs. If there is no
sound, try changing the sound output in the
TV’s settings menu. The setting should be
changed to PCM or stereo. Please consult
your TV’s manual for detailed instructions.
DAC-loop/Digital out
Your device comes equipped with a DAC-
Loop function that can be activated in the
device menu. The function makes it possible
to upgrade the digital inputs of the amplifier
with an external high-end DAC. This is done
by connecting the jitter reduced coaxial
digital output of the amplifier to the external
DAC. The output of the external DAC will
need to be connected to the XLR input of
the amplifier.
In the DAC-Loop submenu the Network and
USB inputs can be enabled separately.
Both these inputs take full advantage of
the internal synchronous master clock. For
these inputs we recommend leaving the
DAC-Loop function disabled as it in most
cases will not benefit the sound.
In this submenu you can also enable the
digital output to always be active.
Device Menu
Navigation
To enter the device menu, turn the amplifier
on and press and hold the PLAY(2) button
for 5 seconds. To navigate the menu, use
the PREV(1) and NEXT(3) buttons. To select
a sub-menu or feature, press the “PLAY(2)
button. To exit the menu, navigate to “Exit”
and press PLAY(2), or turn one of the ampli-
fier’s knobs.
NOTE: Some menu features require con-
nection to the internet to work properly.
See Network Setup
Info
Information about the Hardware Version of
your product and the Software Version cur-
rently running.
Network
Information about the Network Device
Name and the IP Address of your product.
Update
Check for and download the newest soft-
ware for your product.
Sleep
By default, the amplifier will automatically
switch itself off after 15 minutes with-
out music, or with very low signal on the
speaker outputs. Sleep / Auto off can be
disabled in this menu.*
Reset
Here you can reset the product to the de-
fault factory settings. This will not affect any
software updates you have installed.
HT
Most inputs can be configured to act as a
Home Theater input. This will set the input
volume at a fixed high volume level.
NOTE: The Hegel device menu
can be updated with new fea-
tures and options.
For an up to date and in-depth
description of the menu and its
features, please visit
ECO
STOP
PREV
DAC+
PLAY
PREV PLAY
DISP
NEXT
IN+
NEXT
VOL+
MUTE
IN-
VOL-
COMPUTER
PREV - Up
PLAY - Select
NEXT - Down
Menu navigation
Содержание H590
Страница 1: ...H590 User Manual ...
Страница 11: ...www hegel com ...
