Hegel H590, Руководство пользователя

Страница: 5 / 11

9 8
3. Connect the power cord
4. Turn on the amplifier
Power Switch
Operating the H590
The source and volume can be changed
using the input and volume selector on the
front panel or using the remote control.
Power Button
The H590 amplifier can be switched on and
off with the power button located on the un-
derside of the amplifier, towards the front of
the unit.
NOTE: When powering up, the H590 takes
a few seconds to calibrate, the outputs are
muted and the volume flashes to indicate
that mute is on. This is normal and is part
of the start-up procedure.
NOTE: When the H590 has been switched
off, wait 30 seconds before powering it on
again.
Sleep/Auto standby
In compliance with the EU Energy Efficiency
Directive the Hegel device will automatically
switch off after 15 minutes without sens-
ing a signal, or with very low signal on the
speaker outputs. You can disable or change
the Sleep/ Auto Standby settings in the
device’s menu.*
General Use