Hegel H590, Руководство пользователя

Страница: 7 / 11

12 13
General information
The Hegel amplifier can be controlled with
the included Hegel RC8 Remote Control.
The RC8 controls Hegel products, such as
amplifiers and preamplifiers, and most me-
dia players, avoiding the need for multiple
remote controls
The remote control uses two standard 1.5-
volt LR03 AAA batteries. To insert the bat-
teries, use a crosshead (Phillips) screw-
driver to gently remove the four screws on
the underside of the remote control.
Insert the batteries with the correct polarity
with + sign and – sign, as shown inside the
battery holder. Be careful when inserting the
batteries to not damage the battery holder.
Replace the cover. Insert the screws by gen-
tly turning them by hand, to avoid damaging
the threads in the remote control chassis.
Do not tighten the screws too much, as this
can damage the screws and the soft metal
chassis of the remote control.
CAUTION: Do not drop the remote control
on the floor, as this can damage its internal
parts and the battery holder.
Mute
The MUTE(14) button mutes the outputs on
the amplifier. The volume flashes to
indicate that mute is on. Press the mute
button, or adjust the volume level, to switch
mute off.
On/Off (standby)
The ECO(5) button will turn the amplifier on
or off (standby).
Display On/Off
The DISP(6) button may be used to turn
the display on or off. Hold the DISP button
for more than 1 second to turn the display
off. When adjusting inputs or volume the
display will light up momentarily. To turn the
display on again, press DISP.
Set startup volume
A user defined volume may be used as
the power-up volume.
Adjust the volume to
the desired start up level. Press DAC+(4)
and VOL-(15) simultaneously. The volume
number will blink three times to indicate
that the new start up volume has been
saved.
Set max volume
A user defined volume may be used as
the max volume. Adjust the volume to the
desired maximum level. Press DAC+(4)
and VOL+(12) simultaneously. The volume
indicator will blink three times to indicate
that the new max volume has been saved.
To restore to the default max volume of 99,
turn the volume all the way up and press
DAC+ and VOL+ once more. The volume
indicator will blink 99 three times to indicate
that the max volume has been reset.
Reset to Factory Default Settings
By pressing and holding the DAC+(4) button
while pressing MUTE(14), the amplifier will
be reset to factory settings. This will clear all
user defined settings, including IP settings,
and restart the amplifier. This can also be
done in the amplifier’s menu. Software
updates will not be affected.
Remote Control - RC8
Remote control buttons (starting top left)
1.
PREV
Skip to previous track on most media players
2. PLAY Play/Pause on most media players
3. NEXT Skip to next track on most media players
4. DAC+ Input source selector button for Hegel DACs
5. ECO On/Off (standby)
6. DISP
Display on/off (hold for off)
7. PREV Skip to previous track on Hegel CD-players
8. PLAY Play/Pause for Hegel CD-players
9. NEXT Skip to next track on Hegel CD-players
10. IN+ Switches to next input on Hegel amplifiers
11. STOP
Stop/Eject for Hegel CD-players
12. VOL+ Volume up for Hegel amplifiers
13. IN- Switches to previous input on Hegel amplifiers
14. MUTE Mute for Hegel amplifiers
15. VOL- Volume down for Hegel amplifiers
ECO
STOP
PREV
DAC+
PLAY
PREV PLAY
DISP
NEXT
IN+
NEXT
VOL+
MUTE IN- VOL-
COMPUTER