hecht 9534 SQ, Оригинальное руководство пользователя

Страница: 36 / 44

36 / 44
PL
SK
CS
EN
PROBLEMS SHOOTING
Problems which you meet while working with the machine have mostly very simple reason which
you can put easy in order by yourself. If your are in doubts or if the repair is more complicated,
or it is a failure which is not described here, contact authorised service center. All repairs let do
in authorised service centers, which used original spare parts.
MALFUNCTIONS POSSIBLE CAUSES CORRECTIVE ACTIONS
Engine fails to start
Engine flooded Repeated start attempts with choke Off
Water in fuel or old fuel Drain tank and refill with fresh fuel
Engine starts hard or runs
poorly
Spark plug faulty Replace the spark plug
Fuel cap ventilation is blocked Clear the ventilation
Auger does not rotate
Foreign matter blocking Clean
Shear pin broken Replace the broken pin
Auger drive belt slipping Adjust the belt and adjust control rope
Auger drive belt broken Replace the belt
Auger does not stop when
the lever is released
Auger drive belt is out of correct
position
Adjust the belt
Auger drive guide is out of correct
position
Adjust the guide
Snow thrower veers to one
side
Tire pressure not equal Adjust the tire pressure
Uneven tires Unify tires
Scraper blade or shoes uneven
adjusted
Adjust scraper blade and shoes
Inadequate or no ejection
Snow ejection unit blocked
Clean the snow ejection unit with
a solid object
Auger screw not turning Adjust loose clutch cable
Shearing bolts sheared Replace shear bolts
CAUTION! Faults which can not be rectified with the aid of this table may be
rectified by a authorized service centre.
TRANSPORT
For manipulation with snow thrower make following steps: Start the engine, shift gear and drive
the machine to required place. Push the machine with a released control lever to required place.
Before transport of the machine by transport vehicle switch off the engine and wait till it is cold.
Disconnect the connector of spark plug. Transport snow thrower in horizontal position.. Machine
should be secured on the vehicle by strap belts. Always check important details in the manual if
the machine should be stored for long time.