2.
SETTING UP
2.1
STARTING THE DEVICE
First, plug in the power cord to a mains power outlet, and click the switch on the right. Press to turn on the radiator, ECO light
turns on.
2.2
CONFIGURATION OF SETTING TEMPERATURE
Once the unit is ON, press to select the desired temperature. Depending on the temperature selected, light displayed is different;
see images below.
18 ºC
19 ºC
21 ºC
22 ºC
24 ºC
2.3 SELECT THE OPERATING MODE
There are 4 operating modes:
Manual. The user determines the setpoint temperature.
Timer: The user selects both the setpoint temperature and the operating time or downtime.
Replay. The user selects desired temperature and time duration- the unit automatically starts and stops.
Fil pilot.
Manual Mode
To select temperature, press repeatedly until the light activates on the desired temperature (see figures 2.2).
Timer Mode
Timer connection:
The device will work at the preset temperature as per user’s configuration
Press to select the desired temperature
Press
to select the operating time. By pressing
repeatedly, operating hours or a combination of operating hours will be
selected. E.g.
The unit is programmed at 21ºC during 5 hours.
To deactivate the timer function press
repeatedly until the time LEDs are deactivated.
Timer disconnection
. The device will stop working as per user’s configuration.
On starting the device again, press to select the temperature to reach.
Press during 2 seconds to switch to OFF mode.
Press
to select the switch-off time of the device. Press and hold
repeatedly to select the operating hours or the combination of
operating hours of the device.
E.g.
The device is disconnected during 5 hours
To deactivate the timer function press repeatedly
