CAUTION: Remove the grease receptacle before moving grill. Use caution
when handling receptacle or serious injury may occur. Receptacle must be
installed for grill operation.
G E N E R A L
I N F O R M A T I O N
/
S A F E T Y
4
4
This appliance must be grounded while in use to protect the
operator from electrical shock. The appliance is equipped with a
3-conductor cord and 3 prong grounding-type plug to fit the
proper grounding-type receptacle.
GROUNDING
SPECIFICATION AND WIRING DIAGRAM FOR BIGW EGrill
AC POWER: 230 - 240 V AC ˜ 50 Hz 7A, 1500 W
1.
Only use a 3-wire extension cord that has a 3-prong
grounding-type plug and 3-prong cord connector that
accepts the plug from the appliance.
2.
Only use extension cords that have an electrical rating no
less than the rating of the appliance.
3.
Do not use damaged extension cords. Examine cord before
using and replace if damaged. Do not abuse extension cord.
4.
Do not tug on the cord to disconnect it from appliance or
power source.
5.
Keep cord away from heat and sharp edges.
6.
Keep connection to extension cord dry and off the ground.
7.
Never use more than one extension cord to plug appliance
to power source.
EXTENSION CORDS
• FAILURE TO COMPLY WITH THESE INSTRUCTIONS
COULD RESULT IN A FIRE OR EXPLOSION THAT
COULD CAUSE SERIOUS BODILY INJURY, DEATH OR
PROPERTY DAMAGE.
• KEEP A MULTI-PURPOSE FIRE EXTINGUISHER
READILY ACCESSIBLE. IN THE EVENT OF A FIRE,
TURN CONTROL KNOBS TO ‘OFF’ AND UNPLUG
GRILL FROM OUTLET. NEVER USE WATER TO PUT
OUT A FIRE IN THIS OR ANY OTHER ELECTRICAL
APPLIANCE.
• THIS GRILL IS NOT INTENDED TO BE INSTALLED IN
OR ON RECREATIONAL VEHICLES AND/OR BOATS.
• NEVER
LINE
THE
BOTTOM
OF
THE
GRILL
HOUSING
WITH
CHARCOAL,
ALUMINIUM
FOIL,
SAND
OR
ANY
SUBSTANCE
THAT
WILL
RESTRICT
THE
FLOW
OF
GREASE
INTO
THE
GREASE
RECEPTACLE.
• BEFORE
EACH
USE
OF
YOUR
GRILL
PULL
OUT
THE
GREASE
RECEPTACLE
AND
REMOVE
ALL
GREASE
AND
FOOD
DEBRIS
TO
PREVENT
GREASE
FIRE
HAZARD.
•
USE
YOUR
GRILL
AT
LEAST
600
mm
AWAY
FROM
COMBUSTIBLE
OBJECTS
THAT
CAN
MELT
OR
CATCH
FIRE
(SUCH
AS
VINYL
OR
WOOD
SIDING,
FENCES
AND
OVERHANGS)
OR
SOURCES
OF
IGNITION
INCLUDING
PILOT
LIGHTS
ON
WATER
HEATERS
AND
LIVE
ELECTRICAL
APPLIANCES.
IF ANY OF THE ORIGINAL WIRING SUPPLIED WITH THE
APPLIANCE NEEDS TO BE REPLACED, CONTACT
THERMOFILM AUSTRALIA
PTY.LTD. FOR REPLACEMENT ON 03 9562 3455
MON-FRI
8.30am-5.00 pm EST
Thermostat /150°C
Timer 120 min
Infrared knob
Infrared lamp
heat element
230 V / 750 W
230 V / 750 W
White / 14AWG 105°C
Blue / 14AWG
105°C
Black / 16AWG
250°C.
Black / 16AWG
250°C.
Brown / 14AWG 105°C
INFRARED LAMPS AND GRILL SURFACES MAY STILL BE
HOT EVEN IF HEAT ON LAMP IS OFF.
