06:00
10
20
08:00
19ºC
4ºC
ºC
12:00
22ºC
14:00
16:00
16ºC
22ºC
10ºC
22:00
PROGRAM
3
PROGRAM
4
PROGRAM 5
PROGRAM 6
An example of one day programme on
HSPSSE
PROGRAM 1
PROGRAM 2
TIM
E S
ETT
IN
G
PROGR
A
M
M
E SET
TIN
G
- SET MINUTES
- SET DAY
- SET HOURS
- SELECT DAY TO SET
- SET MINUTES FOR PROGRAM
- SELECT PROGRAM TO SET
- SET TEMPERATURE FOR PROGRAM
Logic diagram for setting programme on
HSPSSE
PROG
MODE
TEMP
1.
Press and hold PROG for 5 seconds to enter the
time setting.
2.
The day will be flashing.
3.
Use TEMP and MODE to navigate day, press
PROG to select day.
4.
PROG 1 will be flashing. Use TEMP and MODE to
navigate programme, use PROG to select
programme.
5.
The minutes will be flashing.
6.
To set minutes, use TEMP and MODE to change
minutes, press PROG to set the minutes.
7.
The hour will be flashing
8.
To set hour, use TEMP and MODE to change
hour, press PROG to set the hour.
9.
The temperature will be flashing.
10. To set temperature, use TEMP and MODE to
change temperature, press PROG to set
temperature.
To add another programme repeat steps 2-10.
The
HSPSSE
has a 7-day timer with up to 6
programming steps available for each day. In the
programming you can set a start time and a
temperature for each programme. Each programme
has to be used.
Press PROG from PROG mode to bring forward the next
programme. To clear advance mode, press PROG.
Press and hold TIME and TEMP together for 5 seconds. The
display will show symbol. Repeat the step to unlock.
Every time there is a demand for heat, the display will
show the heat icon.
- reduced heat output when the room temperature is
close to the set temperature.
- full heat output
Light colour
Heater status
STAND-BY No heat output
Reduced heat output
Full power heat output
5
8. Set 7-day programme
9. Advance mode
11 Keys locking
10. Heat symbol on the display
12. Status light on the heater
