When the appliance is connected to the mains
supply and the wall socket is switched ‘ON’, the LED
indicator on the moulding will light up green, showing
that the power is available to the unit. Before you can
use the
HSPSSE
, it has to be activated by pressing any
control button. The LCD backlight will turn on. To
operate any control button, press within 2 seconds of
activation.
Mode
Temp
Prog
Time
SET TIME
PRESS AND HOLD
FOR 5 SECONDS
SET PROGRAMME
PRESS AND HOLD
FOR 5 SECONDS
T
EMPERATURE SET
WHEN DISPLAY SHOWS
ROOM TEMPERATURE,
PRESS TO ADJUST
MODE SELECTION
BOOST, MANUAL,
SETBACK AND
PROGRAM
-
Press and hold the TIME button for 5 seconds.
Minutes are flashing - use TEMP and MODE
buttons to set minutes.
-Press TIME button
Hours are flashing - use TEMP and MODE
buttons to set hours.
-Press TIME button
Day is flashing - use TEMP and MODE
buttons to set Day.
Once you are happy with the settings, press ‘Time’ to
return to main screen.
HSPSSE h
as 4 operating modes:
BOOST, MANUAL, SET BACK, PROGRAM.
Each mode can be selected by pressing the MODE
button to cycle through the options. The cycle
sequence will always start with BOOST mode followed
by MANUAL, SET BACK and PROGRAM.
In manual mode, the heater maintains the set
temperature.
1. Use TEMP and MODE to set the temperature.
To amend the set temperature when in Manual
mode, simply activate the display by pressing any
button. Press TEMP, then use TEMP and MODE to
change the temperature. Once the temperature is
set, leave the display to return to the main screen and
the settings will be saved.
In this mode, the
HSPSSE
will follow the week’s time /
temperature programme.
You can temporarily override the temperature in PROG
mode by simply activating the display and using the
TEMP and MODE buttons to set the new temperature.
The new set temperature will be then maintained until
the next program step.
In the setback (ECONOMY) mode,
HSPSSE
lowers all
temperatures in the 7-day programme by a set value.
You can set how much to lower the programme
temperatures in SETB mode by simply activating the
display, pressing TEMP and using TEMP and MODE to set
the new value.
The display will first show the temperature difference and
after 2 seconds the new set temperature.
The boost feature increases the room temperature for 15
minutes.
1. Use TEMP and MODE to set the temperature.
To amend the set temperature when in Boost mode,
simply activate the display by pressing any button. Press
TEMP, then use TEMP and MODE to change the
temperature. Once the temperature is set, you can
leave the display to return to the main screen and the
settings will be saved. After 15 minutes, the
HSPSSE
will
return
to previous operating mode.
4
1. Basic Operation
2. Time and day setting
3. Selecting operating mode
4. BOOST - 15 minutes
5. MAN - Manual Mode
7. PROG - Automatic time mode
6. SETB - Reduction in programmed temperature
