Heatscope HTS.1.PUR.24.BL, Инструкция по установке и эксплуатации

Страница: 11 / 14

© Copyright 2004 - 2020 MAD Design Group. All rights reserved. V0120
9
UNPACKING THE UNIT / PACKAGING
Unpack the unit and the accessories carefully. When opening the packaging, do not use sharp objects that could
damage the unit.
This product comes supplied in environmentally friendly packaging. All HEATSCOPE® packaging that comes into
cir culation either directly or via the trade is certified in accordance with §6 of the German Packaging Directive. As a
result, all HEATSCOPE® packaging can be disposed of in an environmentally friendly manner in collection containers
for packaging materials. All legal regulations must be observed here. Further information is available from the
manufacturer.
Care information! Important! Clean the unit with a damp cloth before using it for the first time. Do not use cleaning
products containing alkaline substances such as sodium hydroxide or soap, surfactants or solvents/alcohol.
INSTALLATION INSTRUCTIONS
The different options for installing the HEATSCOPE® radiant heater are shown in the diagrams in the beginning of
this manual. Ensure that the radiant heater is fixed securely to the installation surface. In terms of tensile and shear
strength, the fixings must be able to withstand at least 3 times the weight of the radiant heater (in cluding accessories)
that is to be installed. When installing the unit, use the correct screws (supplied) for the surface.
Please bear in mind that you only need one fixing bracket to fix your unit safely. Please refer to the minimum installation
dimensions for the unit (cf. „spacings“).
Acc. to EU 2015/1188 ecodesign directive for energy-related products the application of a thermostat with a room
sensor, weekday control system and window opening detection is mandatory, when installation a heating unit indoors.
This is possible with this HEATSCOPE® type. In combination with the optional available thermostat DEVIreg™ Smart
this heater of this series fulfills the conformity of the ecodesign directive.
HEATSCOPE® heaters are basically made for outdoor use – and in most cases they are used outdoors finally. Due to
this they are factory-set delivered without any thermostat control system acc. to EU 2015/1188 ecodesign directive.
This is consequent, reasonable and will economise valuable ressources. Many times a separate temperature system /
thermostat acc. to ecodesign directive is already installed and the heaters should be fit in this system. In this case the
customer or the assigned installer is responsible to accomplish the EU standards of the ecodesign directive.
OPERATION, INSTALLATION INSTRUCTIONS AND MIN. DISTANCES
Once you have installed the unit, you can use it for the first time.
The HEATSCOPE® features two omnipolar „ON/OFF“ switches. You can control the radiant heater manually using
these selector switches on the unit itself.
The unit must be connected to a residual current circuit breaker and a fuse! Install the unit in any indoor or outdoor
areas. The heater is IP65 protected from water jets and dust.
CAUTION: The mounting of the heater on the wall and on the cieling as well as in glass houses and conservatories has
professionally to be accomplished solely according to the mounting regulations. Specified safety distances given are
min. values and may deviate from the local building and fire safety regulations. The safety distances as well as the local
building and fire safety regulations must be complied with at all times, leave inproper stated installation settings undone
at any time. Deviant installation settings require the technical approval of the manufacturer. In the case of a deviant
installation setting without approval of the manufacturer danger for people and environment may occur. Warranty and
guarantee expires for all heaters, which are not installed according to this operation and installation manual!
Other protective spacings may need to be taken in accordance with local fire safety regulations, e.g. for installation on
cumbustible surfaces.
All cables must be positioned so that they cannot come into contact with the surface of the radiant heater at any time.
The radiant heater must not be installed directly below a power socket. The sides of the HEATSCOPE® must be at
least 20 cm from any power sockets.