Heatmiser touch-n, Руководство пользователя

Страница: 21 / 32

Section Header
Model: Touch-N
20
Feature 07 – Temperature Up/Down Limit: This function allows you to limit the use of
the up and down keys. This limit is also applicable when the thermostat is locked and
so allows you to give others limited control over the heating system.
Feature 08 – Sensor Selection: This thermostat offers 5 sensor modes.
00 = Built in air sensor.
In this mode, the thermostat will maintain the set
temperature by monitoring the built in air sensor.
Note: Built in air sensor only MUST NOT be used to control electric under-floor heating.
Floor sensor only or built in air & floor sensor together must be used.
01 = Remote air sensor.
In this mode, the thermostat will maintain the set
temperature by monitoring the remote air sensor.
02 = Floor sensor.
In this mode, the thermostat will maintain the set temperature by
monitoring the remote floor temperature.
03 = Floor sensor and built in air sensor
. In this mode, the thermostat will maintain
the set temperature by monitoring the built in air sensor and will also ensure the
floor surface doesn’t overheat by monitoring the remote floor sensor.
04 = Floor sensor and remote air sensor.
In this mode, the thermostat will maintain
the set temperature by monitoring the remote air sensor and will also ensure the
floor surface doesn’t overheat by monitoring the remote floor sensor.
Feature 09 – Floor Limit Temperature:
This function allows you to set a maximum
floor temperature in order to protect the floor surface from overheating. This function
works for Sensor Modes 02, 03 & 04 (see above). The default setting is 27˚C.