Heatmiser PRT-ENTS, Руководство пользователя

Страница: 14 / 17

26 25 TouchScreen Series Model: PRT-ETS / PRT-ENTS
Calibration Temperature Setting
Set Icon
If you need to re-calibrate the thermostat, follow these steps.
• Press and hold the OFF key to turn the thermostat OFF ...............................................
• Press and hold the ON key until the temperature appears on the screen ..............
• Use the Up/Down keys to configure the new temperature ...............................
• Press DONE to confirm the new temperature ...................................................................
• Press the ON key once to turn the thermostat back ON ...............................................
Re-calibrating the Thermostat
All icons displayed simultaneously. Factory reset is complete.
The thermostat has a reset function to restore all settings to their factory defaults.
To perform a factory reset, follow these steps.
• Press & hold the OFF key to turn the thermostat display OFF ...............................
• Press and hold the bottom left corner of the LCD for 10 seconds.
• All of the screen icons will appear for 2 seconds and then disappear.
• Press the ON key once to turn the thermostat display back ON ...........................
Factory Reset