16
15
Wireless
Series
Model:
DT-WTS
THE FOLLOWING SETTINGS ARE OPTIONAL AND IN MOST CASES
NEED NOT BE ADJUSTED
Feature 01 – Temperature Format:
This function allows you to select between °C or °F.
Feature 02 - Switching Differential:
This function allows you to increase the switching
differential of the thermostat. The default is 1°C which means the thermostat will
switch the heating on 1°C below the set temperature and will turn it off when the set
temperature is achieved. With a 2°C differential, the heating will switch on 2°C below the
set temperature and will switch off when the set temperature is achieved.
Feature 03 – Frost Protect Temperature:
This is the temperature maintained when the
thermostat is in frost mode. The range is 07-17°C. The default is 12°C and is suitable for
most applications.
Feature 04 – Output Delay:
To prevent rapid switching, an output delay can be entered.
This can be set from 00 - 15 minutes. The default is 00 which means there is no delay.
Feature 05 – Pairing Function:
Allows the thermostat to be paired with the receiver.
Feature 06 - Fail Safe:
If enabled, the thermostat will send a signal to the receiver every
20 minutes. Should the receiver fail to receive the signal from the thermostat, the receiver
will activate the output for 20% of the time. This is to protect the system against a loss of
wireless signal or in case the thermostat battery fails whilst you are away.
Optional Features Explained
The heating is indicated ON when the flame icon is displayed.
When the flame icon is absent, there is no requirement for heating to achieve the set
temperature but the thermostat remains active.
To turn the thermostat OFF completely, press and hold the Power key ..................
The display and heating output will be turned off completely.
To turn the thermostat back ON, press the Power key once .........................................
Heating On/Off
Thermostat completely OFF
Thermostat powered ON
Содержание DT-WTS1
Страница 1: ...1 Model DT WTS Model DT WTS...
