Heatmiser DT-WTS1, Руководство пользователя

Страница: 11 / 13

20 19 Wireless Series Model: DT-WTS
All icons displayed simultaneously. Factory reset is complete.
The thermostat has a reset function to restore all settings to their factory defaults.
To perform a factory reset, follow these steps.
• Turn the thermostat OFF by pressing and holding the Power key.
Press and hold the bottom left corner of the LCD for 10 seconds .........................
• All of the screen icons will appear for 2 seconds and then disappear.
• Press the Power key once to turn the thermostat back on .......................................
Factory Reset
Calibration Temperature
Set Icon
If you need to re-calibrate the thermostat, follow these steps.
• Press and hold the Power key to turn the thermostat OFF .....................................
• Press and hold the OFF key until the temperature appears on screen ..........
• Use the Up/Down keys to configure the new temperature .........................
• Press DONE to confirm settings ........................................................................................
• Press the Power key once to turn the thermostat back ON ....................................
Re-calibrating the Thermostat