COMMUNITY BARBECUE
1
5
A-0060-MAN Heatlie Community Barbecue Instruction Manual V2 Updated Dec 2021
1.
Place the SBI in its packaging on top of the barbecue for ease of
access.
2.
Isolate the gas supply from the barbecue.*
3.
U
nlock and open the barbecue service drawer.
4.
L
ocate and remove the thumb screws shown in Figure 1
3
and
14
securing the SBI in place (4 for CB
BQ
600, 5 for CB
BQ
850).
DO NOT
remove any other screws from the barbecue.
I
t is
potentially
dangerous.
5.
Disconnect the gas supply hose from the SBI.
6.
Grab and slide the SBI in the drawer toward the rear as shown in
F
igure 1
5
.
7.
Tilt the SBI up according to
F
igure 1
6
and pull out the top off the
drawer
8.
Once removed, compare the removed SBI to the replacement unit.
ensuring that the configuration outlined on the labels are the same
or changed as requested (conversion kit).
9.
F
or installation, reverse the previous removal steps.
10.
S
ecure the removed SBI into the packaging and return to Heatlie for
servicing.
U
se the 'From' address located on the packaging.
FIGURE 1
3
FIGURE 1
4
FIGURE 1
5
FIGURE 1
6
Instructions for
R
em
oval/Installation
of the
Serviceable
Burner Insert (SBI) (
for
both CB
BQ
600 and CB
BQ
850)
MAINTENANCE
INSTRUCT
I
ONS
NOTE:
*
This is located on the Gas Cylinder for LPG systems.
S
ome Natural
Gas
system isolation valves are also located on the cylinder. Mains
Natural
Gas location is
dependent
on your individual installation.
if you are unsure, get a licensed gas fitter to remove the SBI.
I
t is recommended this appliance is serviced annually.
this includes:
•
The gas hose and regulator assembly.
•
The gas cylinder/supply test date status. Replace if expired.
•
All gas connections for soundness
with soapy water
(
DO NOT
spray any fluids onto the timer unit)
•
Correct operation of the gas system and burners.
The SBI can be removed and returned to Heatlie for servicing
.
The
Servicing must only be carried out by
Heatlie Barbecues
or
a
licensed gas fitter
.
T
his appliance contains no user serviceable parts.