PRODUCT INFO
HEATIT Z-TRM3
FUNCTIONS
• Floor sensor
• Internal room sensor
• External room sensor
(connected by cable)
• Temperature limiter
• SmartStart
• Weekly program/
setback via gateway
• Temperature read out in gateway
• Firmware update (OTA)
• Power metering
• Relay status LED
• Single pole switch
• Lock mode/child lock
• Calibration
• 5 associations
• Supports encryption mode: S0, S2 Authenticated Class,
S2 Unauthenticated Class
This product is a security-enabled Z-Wave Plus product with
encryption. The product must be used with a security-enabled
Z-Wave Controller in order to fully utilize the product.
TECHNICAL DATA
Protocol
Z-Wave - 868,4MHz
Chip
Z-Wave 500 chip
Rated voltage
230V 50/60Hz
Max load
3600W (resistive load)
750W self-limiting heating cable
Max current
16A
Power consumption
<2,0W
Ambient temperature
0°C to 40°C (during operation)
Temperature range
5°C to 40°C
Hysteresis
0,3°C to 3,0°C (default 0,5°C)
Compatible with NTC
sensors with values
10, 12, 15, 22, 33 and 47 kΩ @ 25°C
IP Code
IP 21
Approvals
Z-Wave Plus, CE, EN 60730-1,
EN 60730-2-9, EMC 2014/30EU,
RoHS 2011/65/EU, LVD 2014/35/EU
Approved for use in bathrooms.
TERMINAL
Use 1,5mm² or 2,5mm² according to load.
MAINTENANCE
The product is maintenance-free, but must not be covered.
ART. NO. PRODUCT
COLOR
Z-WAVE
FREQUENCY
54 305 99
Heatit Z-TRM3 thermostat 3600W 16A White RAL 9003 EU 868,4MHz
54 305 98
Heatit Z-TRM3 thermostat 3600W 16A Black RAL 9011 EU 868,4MHz
54 304 46
Plastic kit for Heatit (front and frame)
Black RAL 9011
99 305 60
Heatit Z-TRM3 thermostat 3600W 16A White RAL 9003 RU 869,0MHz
99 305 51
Heatit Z-TRM3 thermostat 3600W 16A White RAL 9003 AUS 921,4MHz
Heatit Controls AB l Läkarvägen 4, 454 31 BRASTAD, SWEDEN
Phone: +47 61 18 77 77 l [email protected] – www.heatit.com
Heatit Controls AB can
not be held liable for
typographical errors, other
errors or omittances in
our information.
Product specifications
may change without
further notice.
All electrical installations
must be carried out by a
licensed electrician.
The product must be installed
in accordance with national
building codes and our
installers manual.
SMARTSTART
