02-02
9
30344 Rev C
NOVI30 AND NOVI35
Note:
This appliance must be electrically wired
and grounded in accordance with local codes or, in
the absence of local codes, with National Electric
Code ANSI/NFPA 70-latest edition. This appliance
can be used with a thermostat.
Note:
This appliance
DOES
require a 110-120V AC sup-
ply for operation of the blower
.
WARNING!
DO NOT connect 110-120 V AC to the gas control
valve or control wiring system of this appliance.
A 110-120V AC outlet should be located close to the
lower right side of the appliance to allow the blower to
be plugged in.
Figure 7 - Fan Wiring Diagram
Figure 8 - Standing Pilot Ignition Wiring Diagram
WARNING!
Disconnect the electric
power before servicing.
If any of the original wire
supplied with the appli-
ance must be replaced, it
must be replaced with 105
rated wire.
4. WIRING
See Figure 7 and 8 below.
