30344 Rev C
18
02-02
NOVI30 AND NOVI35
P. CLEANING THE GLASS
It is recommended to wear gloves while handling or removing the glass.
Do not remove the glass when hot!
To remove the door frame assembly for cleaning, see Figure 28.
To clean the glass, use a nonabrasive, mild cleaning solution. (For example, a glass cleaner or for stubborn film, an
oven cleaner.) Simply apply an adequate amount to the glass and wipe off with a damp cloth. Please be sure all cleaner
is thoroughly rinsed from the glass.
Never operate this appliance without the glass properly secured in place or if the glass is broken.
In the event of glass breakage, follow glass removal instructions. This will allow the removal of all glass fragments and
sheet metal edge protection strips. Vacuum all remaining glass pieces with a shop vac.
DO NOT VACUUM IF PIECES ARE
HOT.
Replace the glass only with Heatilator glass ordered direct or through your local distributor. Never use substitute
material. Only ceramic glass may be used on this appliance.
CAUTION:
Handle the glass with care to avoid
striking, scratching or slamming shut.
NEVER clean glass when it is hot. Keep
children and pets a safe distance away.
A - Removing the Upper Grille
B - Removing the Control
Access Panel
C - Latch Close-up
D - Removing the Glass to be Cleaned
Figure 28 - Glass Cleaning
CAUTION:
Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and
dangerous operation. Verify proper operation after servicing.
