28
Heatilator • ICON DV • 4042-300 Rev R • 06/07
E. Assemble and Install Storm Collar
Connect both halves of the storm collar with two screws (see
Figure 8.16).
Wrap the storm collar around the exposed pipe section and
align brackets. Insert a bolt (provided) through the brackets
and tighten the nut to complete the storm collar assembly.
Make sure the collar is tight against the pipe section. See
Figure 8.17.
Slide the assembled storm collar down the pipe section until
it rests on the roof
fl
ashing.
Caulk around the top of the storm collar (see Figure 8.15).
Sharp Edges!
• Wear protective gloves and safety
glasses during installation.
CAUTION
Figure 8.17 Assembling the Storm Collar Around the
Pipe
Figure 8.16 Assembling the Storm Collar
