manualshive.com logo in svg

Heatilator ECO-ADV-PS35, Руководство по установке, Страница: 1 / 28

Поделиться
Скачать
Heatilator ECO-ADV-PS35 Скачать руководство пользователя страница 1

 1 

 

 

 

 

                     7058-205A  

 

 

 

 

         6/16/2014

PELLET BURNING STOVES

Model(s):

ECO-ADV-PS35
ECO-ADV-PS50

ECO-CAB50

Installation Manual

Installation & Appliance Set-Up

INSTALLER: Leave this manual with party responsible for use and operation. 
OWNER: Retain this manual for future reference. 

NOTICE: DO NOT DISCARD THIS MANUAL

 HOT 

SURFACES!

 

Glass and other surfaces are hot  

 

during operation AND cool down. 

Hot glass will cause burns.

• 

Do not touch glass until it is cooled

• 

NEVER allow children to touch glass

• 

Keep children away

• 

CAREFULLY SUPERVISE children in same room as 
fi replace.

• 

Alert children and adults to hazards of high temperatures

• 

High temperatures may ignite clothing or other 
fl ammable materials.

• 

Keep clothing, furniture, draperies and other fl ammable 
materials away.

 WARNING

If the information in these instruc-
tions is not followed exactly, a 
fi re could result causing property 
damage, personal injury, or death.

 

•  Do not store or use gasoline or other fl am-

mable vapors and liquids in the vicinity of 
this or any other appliance.

•  Do not overfi re - If heater or chimney con-

nector glows, you are overfi ring. Overfi ring 
will void your warranty.

•  Comply with all minimum clearances to 

combustibles as specifi ed.  Failure to 
comply may cause house fi re.

WARNING

CAUTION

Tested and approved for wood pellets, Burning of any 
other type of fuel voids your warranty.

NOTE

To obtain a French translation of this manual, please contact 
your dealer or visit www.quadrafi re.com

Pour obtenir une traduction française de ce manuel, s’il vous 
plaît contacter votre revendeur ou visitez www.quadrafi re.com

CAUTION

Check building codes prior to installation.
•  Installation MUST comply with local, regional, state and na-

tional codes and regulations.

•  Consult local building, fi re offi cials or authorities having juris-

diction about restrictions, installation inspection, and permits.

www.heatilatorecochoice.com
Consumer Care 1-800-926-4356: Prior to calling, please 
have the model and serial number of the unit you are call-
ing about. Information can be found at the rear of the unit.

Содержание ECO-ADV-PS35





























Отзывы:

Нет отзывов