4
33795 Rev i
01/04
CALIBER DESIGNER SERIES
A. APPLIANCE SPECIFICATIONS
1. U.S. and Canada Certification
The Caliber Designer B-Vent Series gas appliance
has been tested in accordance with the
ANSI
standard Z21.50-2000 (Decorative);
in Canada, the
current
CAN/CGA M2.22-2000, IR41, P4, and IR55
and
has been LISTED by Underwriters Laboratories Inc.
for installation as described in this manual. All
components are UL or AGA safety certified.
2. Local Codes
This installation must conform with local Codes. In
the absence of local Codes comply with the
National
Fuel Gas Code ANSI Z223.1-latest edition
in the U.S.A.,
and the CAN
/CGA B149 Installation Codes
in Canada.
If you need assistance during installation contact your
local dealer or Heatilator Technical Services
Department, Hearth & Home Technologies Inc., 1915
W. Saunders Street, Mt. Pleasant, Iowa 52641,
1-800-927-6841.
HEATILATOR® is a registered trademark of Hearth &
Home Technologies Inc., a Division HON Industries.
3. Glass Certification and Specifications
Heatilator gas appliances manufactured with
tempered glass may be installed in hazardous
locations such as bathtub enclosures as defined by
the CPSC. The tempered glass has been tested and
certified to the requirements of
ANSI Z97.1-1984 and
CPSC 16 CFR 1202. (Safety Glazing Certification
Council SGCC# 1595 and 1597. Architectural Testing,
Inc. Reports 02-31919.01 and 02-31917.01.)
This statement is in compliance with
SPCS 16 CFR
Section 1201.5
Certification and labeling
requirements which refers to
15 USC 2063
stating
Such certificate shall accompany the product or
shall otherwise be furnished to any distributor or
retailer to whom the product is delivered.
Some local building codes require the use of tempered
glass with permanent marking in such locations.
Glass meeting this requirement is available from the
factory. Please contact your dealer or distributor to
order.
We strongly recommend that you DO NOT install B-
Vent Gas Appliances in strong negative air locations,
such as a basement or a public facility. Living rooms
with cathedral ceilings could be susceptible to a
negative air situation, but such installations can be
overcome through raising the termination, depending
on specific installations. This appliance uses room
air for normal operation and could have problems
establishing a positive draft in a negative air location.
In lieu, we recommend a Direct Vent Gas Appliance.
WARNING!
This appliance is tested and listed for use only with the optional accessories listed in these instructions.
Use of optional accessories not specifically tested for this appliance could void the warranty and/or result
in a safety hazard.
Æ