background image

3

Heatilator  •  GBST4336I,  •  2135-900 Rev. L  •  12/15

    Safety Alert Key:

• DANGER! 

Indicates a hazardous situation which, if not avoided will result in death or serious injury.

• WARNING! 

Indicates a hazardous situation which, if not avoided could result in death or serious injury.

• CAUTION!

 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

• NOTICE:

 Used to address practices not related to personal injury.

Table of Contents

A.  Congratulations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
B.  Limited Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1 Listing and Code Approvals 

 

A. Appliance Certi

fi

 cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

B.  Tempered Glass Speci

fi

 cations . . . . . . . . . . . . . . . . . . . . . 7

C. BTU Speci

fi

 cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

D.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . . 7
E.  Non-Combustible Materials Speci

fi

 cation. . . . . . . . . . . . . . 7

F.  Combustible Materials Speci

fi

 cation  . . . . . . . . . . . . . . . . . 7

G. Electrical Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

User Guide

2 Operating Instructions 

 

A.  Gas Fireplace Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
B.  Your Fireplace  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
C.  Clear Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
D.  Decorative Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
E.  Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
F.  Remote Controls, Wall Controls and Wall Switches . . . . . . 9
G. Outside Air (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
H.  Before Lighting Fireplace . . . . . . . . . . . . . . . . . . . . . . . . . . 9
I.  Lighting Instructions (IPI) . . . . . . . . . . . . . . . . . . . . . . . . . 10
J.  After Fireplace is Lit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
K.  Frequently Asked Questions  . . . . . . . . . . . . . . . . . . . . . .  11

3 Maintenance and Service 

 

A.  Maintenance Tasks-Homeowner  . . . . . . . . . . . . . . . . . . . 12
B. Maintenance Tasks-Quali

fi

 ed Service Technician  . . . . . . 13

Installer Guide

4 Getting Started 

 

A.  Typical Appliance System. . . . . . . . . . . . . . . . . . . . . . . . . 14
B.  Design and Installation Considerations . . . . . . . . . . . . . . 15
C.  Tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . . . 15
D.  Inspect Appliance and Components . . . . . . . . . . . . . . . . . 15
E.  Negative Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5 Framing and Clearances 

 

A.  Selecting Appliance Location . . . . . . . . . . . . . . . . . . . . . . 17
B.  Constructing the Appliance Chase . . . . . . . . . . . . . . . . . . 18
C.  Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
D.  Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 19

6 Termination Locations 

 

A.  Vent Termination Minimum Clearances . . . . . . . . . . . . . . 20

7 Vent Information and Diagrams 

 

A.  Vent Guidelines  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B.  Vent System Con

fi

 guration . . . . . . . . . . . . . . . . . . . . . . . . 21

8 Vent Clearances and Framing 

 

A.  Pipe Clearances to Combustibles  . . . . . . . . . . . . . . . . . . 22
B.  Wall and Ceiling Penetration Framing . . . . . . . . . . . . . . . 22
C.  Vertical Penetration Framing . . . . . . . . . . . . . . . . . . . . . . 22

9 Appliance Preparation 

 

A.  Installing Outside Air Kit Damper Assembly . . . . . . . . . . . 23
B.  Gas and Electrical Connections . . . . . . . . . . . . . . . . . . . . 23
C.  Securing and Leveling the Appliance . . . . . . . . . . . . . . . . 24

10 Installing Vent Pipe 

 

A.  Assembly of Vent Sections . . . . . . . . . . . . . . . . . . . . . . . . 25
B.  Attaching Vent to Firebox . . . . . . . . . . . . . . . . . . . . . . . . . 25
C.  Securing Vent Sections  . . . . . . . . . . . . . . . . . . . . . . . . . . 25
D.  Install Attic Insulation Shield . . . . . . . . . . . . . . . . . . . . . . . 25

11 Gas Information 

 

A.  Fuel Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
B.  Gas Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
C.  Gas Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
D.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . 26

12 Electrical Information 

 

A.  Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
B.  IntelliFire Ignition System Wiring . . . . . . . . . . . . . . . . . . . 27
C.  Optional Accessories Requirements  . . . . . . . . . . . . . . . . 27
D.  Electrical Service and Repair . . . . . . . . . . . . . . . . . . . . . . 28
E.  Junction Box Installation. . . . . . . . . . . . . . . . . . . . . . . . . . 29

13 Finishing 

 

A.  Splatter Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
B.  Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 32
C.  Facing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

14 Appliance Setup 

 

A.  Remove Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 33
B.  Remove the Shipping Materials . . . . . . . . . . . . . . . . . . . . 33
C.  Clean the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
D.  Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
E.  Lava Rock and Glowing Ember Placement . . . . . . . . . . . . . . 33
F.  Install the Log Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 34
G. Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
H.  Install Trim Kits and Surrounds  . . . . . . . . . . . . . . . . . . . . 37
I.  Air Shutter Setting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Содержание BGST4336I














































Отзывы: